Oracle SPARC Enterprise M3000 Reference Manual Download Page 516

Page: 516 / 552

snapshot(8)

496

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008

command. The following example decrypts the file

jupiter_10.1.1.1_2006-07-08T22-33-44.zip.e

Every

.zip

archive generated by

snapshot

includes two files generated by

snapshot

itself. The first file, called

README

, contains the original name of the

.zip

archive, the name of the configuration file on the Service Processor used to

create the

.zip

archive, the version of

snapshot

and whether log-only mode (the

-l

flag) was used to generate the archive. The second file, called

CONFIG

, is a copy

of the actual configuration file used by

snapshot

to generate the archive.

The data collected by

snapshot

may potentially be used by Service personnel to

diagnose problems with the system.

snapshot

can collect different sets of data for

different diagnostic purposes. The three different sets are named

Initial

Root

Cause

, and

Full

, and are specified through the use of the

-L

option.

Privileges

You must have

platadm

fieldeng

privileges to run this command.

Refer to

setprivileges

(8) for more information.

OPTIONS

The following options are supported.

openssl aes-128-cbc -d -in jupiter_10.1.1.1_2006-07-08T22-33-

44.zip.e -out jupiter_10.1.1.1_2006-07-08T22-33-44.zip

-D

directory

Used with the

-T

option, specifies a value for

directory

instead

of the value set using

setarchiving

(8). The directory field

must not begin with a "

" or a "

". Refer to the description of

the

-T

option for more detailed information.

-d

device

Specifies the external media device to use. The following
option is available to

-d

-r

Removes all files from the external media
device prior to data collection. This option
is not valid with the

-t

-T

options.

-E

time

Specifies the end time for the time period for which data is
collected. Used with the

-S

time

option for the start time,

defines the period of time for which log messages are collected
by

snapshot

. Only those log entries created before the time

specified by

-E

time

are collected by

snapshot

. Refer also to

the description of the

-S

option.

time

Interpreted using

strptime

(3), using one

of the following two formats:

%Y-%m-%d,%H:%M:%S

%Y-%m-%d_%H-%M-%S

Summary of Contents for SPARC Enterprise M3000









































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Related manuals for SPARC Enterprise M3000

Brands by name

Popular brands

Oracle SPARC Enterprise M3000, Reference Manual

Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Related manuals for SPARC Enterprise M3000

Brands by name

Popular brands