Oracle SPARC Enterprise M3000, Reference Manual

Page: 237 / 552

setldapssl(8)
System Administration 223
OPERANDS The following operands are supported:
enable|disable When used with no other operands, enable or disable
LDAP/SSL.
loadcert
loadcert console
prompts for certificate information
to be entered at the console. Use this command to paste
certificate information copied from a file. Terminate input
with
CTRL-D
.
loadcert
URI loads a certificate file for the LDAP/SSL
server. Supported formats for URI are:
http://
server
[:
port
]/
path
/
file
https://
server
[:
port ]/ path / file
ftp://
server
[:
port ]/ path / file
file:///media/usb_msd/
path / file
rmcert Delete certificate for an LDAP/SSL server. strictcertmode
must be in the disabled state for a certificate to be
removed.
group administrator Assign group name for up to five specified administrator
groups. The administrator group has platadm, useradm,
and auditadm privileges and you cannot change that.
group operator Assign group name for up to five specified operator
groups. The operator group has platop and auditop
privileges and you cannot change that.
group custom Assign group name and privileges for up to five groups.
userdomain Configure the user domain. See
EXAMPLE 6
, below, for
important information.
defaultrole Configure default privileges. If defaultrole is configured,
users have privileges as specified by defaultrole after
authentication; user group membership is not checked. If
defaultrole is not configured, users’ privileges will be
learned from the LDAP/SSL server based on group
membership.
timeout Configure transaction timeout, in seconds. seconds can be
1 to 20. The default is 4. If the specified timeout is too
brief for the configuration, the login process or retrieval
of user privilege settings could fail.