Oracle SPARC Enterprise M3000 Reference Manual Download Page 425

Page: 425 / 552

showhostname(8)

System Administration

407

NAME

showhostname - display the current host name for the XSCF unit

SYNOPSIS

showhostname

{

-a

xscfu

}

showhostname

-h

DESCRIPTION

showhostname

(8) command displays the current host name for the XSCF unit.

The host name is displayed in Fully Qualified Domain Name (FQDN) format.

Privileges

You must have one of the following privileges to run this command:

useradm

platadm

platop

auditadm

auditop

domainadm

domainmgr

domainop

fieldeng

Refer to

setprivileges

(8) for more information.

OPTIONS

The following options are supported:

OPERANDS

The following operand is supported:

EXTENDED

DESCRIPTION

■

In the M8000/M9000 servers, a defect occurred on standby XSCF unit shows a
message.

■

The

sethostname

(8) command sets a host name for an XSCF unit.

EXAMPLES

EXAMPLE 1

Displays the current host names for all XSCF units.

-a

Displays the current host names for all XSCF units. If an XSCF
unit name is specified with the

-a

option, the XSCF unit name is

ignored.

-h

Displays usage statement. When used with other options or
operands, an error occurs.

xscfu

Specifies the XSCF unit name to be displayed. One of the
following values can be specified. If

xscfu

is specified with the

-a

option,

xscfu

is ignored.

xscf#0

XSCF unit 0

xscf#1

XSCF unit 1 (In the M8000/M9000 servers)

XSCF>

showhostname -a

xscf#0: scf0-hostname.example.com

xscf#1: scf1-hostname.example.com

Summary of Contents for SPARC Enterprise M3000









































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Related manuals for SPARC Enterprise M3000

Brands by name

Popular brands

Oracle SPARC Enterprise M3000, Reference Manual

Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Related manuals for SPARC Enterprise M3000

Brands by name

Popular brands