Oracle SPARC Enterprise M3000 Reference Manual Download Page 340

Page: 340 / 552

showarchiving(8)

324

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008

2. Time of the most recent attempt to connect to the archive host, and the outcome of that

attempt (success or failure):

3. Table of the status information for audit logs and non-audit logs:

If the

-e

option is specified

showarchiving

displays the details of the last ten

archiving errors that occurred.

EXAMPLES

EXAMPLE 1

Viewing Status and Configuration Data

Username for ssh login

User name which the Service Processor uses to
login to the archive host. Initial value is

Not

configured

Archive host public key

The public key which the Service Processor
uses to verify the identity of the archive host.
This field is not displayed unless the

-v

option

is specified.

Archive host fingerprint

The

md5

fingerprint of the public key which

the Service Processor uses to verify the
identity of the archive host.

Latest

communication

The completion time of the latest attempt to communicate
with the archive host.

Connection status

The outcome of the latest attempt to connect to the archive
host; successful (

) or unsuccessful (

FAILED

Archive space

limit

The amount of space allocated for the archives.

Archive space used

The amount of space currently consumed by the archives.

Total archiving

failures

A counter of failed archiving operations.

Unresolved

failures

A counter of failed archiving operations which the Service
Processor will continue to retry.

XSCF>

showarchiving

*** Archiving Configuration ***

Archiving state ---------- Disabled

Archive host ------------- Not configured

Archive directory -------- Not configured

User name for ssh login -- Not configured

Summary of Contents for SPARC Enterprise M3000









































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Related manuals for SPARC Enterprise M3000

Brands by name

Popular brands

Oracle SPARC Enterprise M3000, Reference Manual

Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Related manuals for SPARC Enterprise M3000

Brands by name

Popular brands