Oracle Pillar Axiom, Service Manual

Page: 106 / 317

Chapter 4 Replace Slammer Private Interconnect Modules 87
Pillar Data Systems Confidential
After you replace this FRU, Guided Maintenance restarts the
target control unit (CU).
To replace a Slammer private interconnect module, perform
the tasks that are outlined in
Table 25 .
Step 4 Resume shows only when the Enable Automatic
Recovery option has not been selected in the Global Settings
section of the GUI. When this option has been selected,
Step 4 becomes Verify Status.
Table 25 Private interconnect module replacement tasks
Guided Maintenance Task
Step 1 Identify Identify the Target FRU (Optional) .
Step 2 Prepare Prepare the System for FRU Replacement .
Step 3 Replace Replace the private interconnect module FRU:
1
Remove a Slammer Private Interconnect Module to
make room for the private interconnect module
replacement.
2 Insert a Slammer Private Interconnect Module to
insert the private interconnect module replacement.
Step 4 Resume Performed as part of private interconnect module
replacement.
Step 5 Verify Status Performed as the final step in private interconnect
module replacement.