Management / Security Functions - 78
Locks Audit Trail
This function is used to display or print the audit trail
from a guestroom lock or off-line card reader. This data
is retrieved from the locks using the PP. See
Read
Openings
on page 114 for instructions on using the
Portable Programmer to retrieve audit data from the
locks.
To generate a report of lock transactions, perform the
following steps:
1.
Connect the Portable Programmer and turn it on. See
Connecting to the HT22
on page 111 for instructions
on connecting the Portable Programmer to the front
desk console.
2.
Enter your password and press the ENTER key.
3.
Press the MENU key.
4.
Press the RIGHT ARROW key three times to enter
the Security menu.
5.
Press the DOWN ARROW key two times to select
Locks Audit Trail.
6.
Press the ENTER key. The screen will display a list
of the locks that have been read with the Portable
Programmer, and the date and time that the locks
were read.
LOCKS AUDIT TRAIL
101
11/28
17:51
212
11/28
18:04
7.
Use the UP and DOWN ARROW keys to select a
lock, and press the ENTER key.
8.
The screen will display the room number of the lock,
the date and time that the lock was read and the clock
date and time at the moment the lock was read. This
allows you to see if the time is correct in the lock.
Summary of Contents for HT22
Page 1: ...Onity Inc HT22 Users Manual Version 10 0 Published October 2009 ...
Page 8: ......
Page 22: ......
Page 144: ......
