Onity HT22, User Manual

Page: 123 / 153

Maintenance Functions - 115
Open
The OPEN function can be used to unlock a door that
will not respond to a Guest Card or any Master Cards. It
will even open a door that has missing or dead batteries.
To OPEN a door with the PP, follow these steps:
1. Connect the PP to the lock and turn it ON.
2. Select OPEN by pressing the MENU button.
3. The message "Access Code:" will be displayed on the
screen. Press the UP ARROW key to find the first
digit of the code, and then press the TX key. Press the
UP ARROW key again to find the second digit, and
press the TX key. Repeat this procedure for digits 3
and 4. Upon entering the fourth digit, the PP will
display "Transmitting" and the lock will open.
Just like an "E" key, the OPEN function will unlock a
door that is locked with the deadbolt. For this reason
the PP should be secured when not in use. If you cannot
secure the PP, remove and reinstall one battery after
each use. This will require that you connect the PP to
the console and use the Load Portable Programmer
function prior to performing the three steps above.
Daylight Savings Time
Planning for Daylight Savings Time changes does not
only involve changing the time on your front desk
console. This is the time to make sure all of your
systems are set to the correct time and date and are
functioning normally. The following list will help guide
you at this hectic time:
If you have a PMS Interface,
make sure to change the time
on the PMS also. 1. Adjust the time in your front desk system. Refer to
the section of this manual titled SET DATE AND
TIME for step-by-step instructions on this procedure.
2. Load the PP. Refer to the section of this manual titled
LOAD PORTABLE PROGRAMMER on page 100
for step by step instructions on this procedure.