Maintenance Functions - 101
12.
Press the ENTER key. The screen will display the
data being transferred.
13.
When the process is complete, the screen will display
End of Comm. Press the MENU key to select another
function, or press the EXIT key to log out of the
system. See
Connecting to the Lock
on page 111 for
instructions on using the PP with the locks.
Peripherals
This function is used to establish and monitor
communications with all on-line devices. There are
three functions within the peripherals screen –
Initialize, Update and Change mode. These three
functions are used to keep the data current and
determine the operating parameters in the on-line
devices.
The peripherals that may be connected to the HT22
main station include HT22 workstations, Guest Card
identifiers and on-line card readers. Up to seven
additional HT22 workstations may be connected to a
main terminal. A combination of up to eight identifiers
and on-line readers may also be connected to a main
terminal.
The peripherals main screen maintains a list of these
units and their current status. An X to the left of any
device in the list means that the unit is on-line and
communicating properly. Pressing the HELP key from
inside this list displays the legend for the symbols and a
list of the functions that may be performed from
this menu.
Initializing a Peripheral
This function is used to establish a peripheral within the
HT22 system the first time it is connected to the HT22
system.
To initialize a peripheral device, perform the following
steps:
Summary of Contents for HT22
Page 1: ...Onity Inc HT22 Users Manual Version 10 0 Published October 2009 ...
Page 8: ......
Page 22: ......
Page 144: ......
