Omron SYSMAC CJ Series, Operation Manual

Page: 75 / 371

Data Section 3-3
63
3-3-1-2 Status data
Status words n +1 and n +2 return the status of the CJ1W-MCH72. The table
below lists the layout of these status words.
/i
Status words n +3.. n +13 return the status of the axes and processes of the
CJ1W-MCH72.
/i
Word Bit Description Value Function
n +1 0 Unit operational 0 Unit not operational
1 Unit operational
1 Watchdog on 0 Axes watchdog off
1 Axes watchdog on
2..7 N/A Always 0
8 Program execution
enabled Feedback of word n, bit 0
9 Axes watchdog
enabled Feedback of word n, bit 1
10 Deceleration active Feedback of word n, bit 2
11 Outputs enabled Feedback of word n, bit 3
12..15 N/A Always 0
n +2 0 MECHATROLINK-II
error 0 No MECHATROLINK-II error
1 Error on MECHATROLINK-II bus
1 Axes error 0 No axes error
1 Axes error (See control and status
words n+7 and n+8)
2 BASIC error 0 No BASIC error
1 BASIC error for a running process
3 Battery error 0 Battery OK
1 Battery low or empty
4..15 N/A Always 0
Word Bit Description
n +3 0..15 Servo On flags for axes 0..15
n +4 0..15 Servo On flags for axes 16..31
n +5 0..15 Axis Enable flags for axes 0..15
n +6 0..15 Axis Enable flags for axes 16..31
n +7 0..15 Axis Error flags for axes 0..15
n +8 0..15 Axis Error flags for axes 16..31
n +9 0..15 Axis In Commissioning Mode flags for axes 0..15
n +10 0..15 Axis In Commissioning Mode flags for axes 16..31
n +11 0..13 Process Running flags for processes 1..14
14,15 Always 0