![background image](http://html.mh-extra.com/html/omron/sysmac-c200h-ov001/sysmac-c200h-ov001_operation-manual_1633422052.webp)
44
Level Operation in Priority Mode
2 s
4 s
A
B
C
E
3 s
D
F
1 s
1.5 s
2 s
Message no. 3
output command
Message no. 2
output command
Message no. 3
playback
Message no. 2
playback
Message output
in progress flag
(word n+5 bit 02)
Interrupted
Of the messages whose output command have turned ON when one mes-
sage has been played back and its interval time has elapsed, the message
having the lowest message number is played back. However, if the output
command of a message having a message number lower than that of the
message currently played back turns ON, playback of the current message is
interrupted, and the message having the lower message number takes pre-
cedence.
The message interval is recognized at points A through F in the figure (at
which the playback of each message ends), and the next message is played
back after the specified interval time has elapsed.
The same applies when playback of the current message is interrupted by a
message having a higher priority (point B in the figure).
When the stop command turns ON, playback of the current message is
stopped. Messages are not played back while the stop command is ON.
Recorded messages continue to play back when the stop command has
turned OFF.
However, the message interrupted by the stop command is not played back
even after the stop command has turned OFF. This message is only played
back when its output command turns ON again.
Stop Command
(word n+1 bit 00)
ON-LINE Mode
Section 3-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com