![background image](http://html.mh-extra.com/html/omron/sysmac-c200h-ov001/sysmac-c200h-ov001_operation-manual_1633422074.webp)
66
The following phrases are assigned to each Phrase no.:
Phrase no. 5 = “Unit 5”
Phrase no. 7 = “Unit 7”
Phrase no. 17 = “Requires”
Phrase no. 31 = “Materials”
Note If the number of phrases used is less than 16, set the last Phrase no. to “00”.
@MOV
#0033
120
12014
00100
12015
00102
@MOV
#0517
121
@MOV
#3100
122
DIFU
03000
@MOV
#0033
120
00101
@MOV
#0717
121
@MOV
#3100
122
DIFU
03001
03000
03001
This command transfers repetition (3
times) and interval data (0.3 s) to the
Voice Unit (when input 00101 turns ON).
This command transfers repetition (3
times) and interval data (0.3 s) to the
Voice Unit (when input 00100 turns ON).
This command sets Phrase no. 5 as
the first phrase and Phrase no. 17 as
the second phrase (when input 00100
turns ON).
This command sets Phrase no. 31 as
the third phrase and Phrase no. 00 as
the fourth and last (Phrase no. 00 sig-
nifies the last phrase) phrase (when
input 00100 turns ON).
This command sets Phrase no. 7 as
the first phrase and Phrase no. 17 as
the second phrase (when input 00101
turns ON).
This command sets Phrase no. 31 as
the third phrase and Phrase no. 00 as
the fourth and last (Phrase no. 00 signi-
fies the last phrase) phrase (when input
00101 turns ON).
Output command.
Stop command (while input 00102 is
ON).
The messages, for the above program, are issued as follows:
Phrase Combination Mode Example Programs
Section 4-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com