56
3-9
Operations in ON-LINE Mode
Message Output Modes
The following diagram shows the various options for the Message output
mode during ON-LINE mode operation.
Message
output
modes
Sentence mode
Phrase combination mode
One-shot operation
Level operation
Sequential mode
Priority mode
Sequential mode
Priority mode
Repeat function
Stop function
Repeat function
Stop function
Stop function
Stop function
Combination function
Sequential function
Priority function
Repeat function
Stop function
Sentence Mode
In this mode, one sentence represents one message and messages are
played back one sentence at a time.
Sentences are stored in the message memory in advance and are played
back according to the program.
Item
Function
One-shot
operation
Triggered by the leading edge of the output command. One-shot
operation plays back messages a specified number of times and
at specified time intervals.
Level operation
In Level operation message playback occurs at specified time
intervals while the output command is ON.
Sequential
mode
Messages are played back in the sequence in which each
message’s corresponding output command is turned ON.
Priority mode
Messages, whose output commands are turned ON, are played
back in the order of lowest to highest message number.
Repeat function Repeatedly plays back a message a specified number of times
and at fixed time intervals.
Stop function
Interrupts and stops message playback by turning ON the stop
command.
Operations in ON-LINE Mode
Section 3-9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com