![background image](http://html.mh-extra.com/html/omron/sysmac-c200h-ov001/sysmac-c200h-ov001_operation-manual_1633422035.webp)
27
3-5
ERASE Mode
Messages and displayed error codes can be erased in ERA mode.
Erasing Messages
Set the memory protect
switch to the OFF position.
Set the mode selector
switch to ERA mode.
To erase all messages
Select message number 00
with the MSG No. decrement
switch.
Push the ST/SP switch.
To erase specified messages
Specify the message number
to be erased with the MSG No.
increment/decrement switch.
Push the ST/SP switch.
To erase error codes.
Push the ST/SP switch.
End
Start
When the Voice Unit is ready, the PLAY and REC indicators are blinking at
0.5 second intervals.
RUN
PLAY
REC
ERR
OVF
ERA
Mode
selector
switch
PLAY and REC indicators are
blinking at 0.5 second inter-
vals to indicate erasure stand-
by status.
Erase messages
Specify the number of the message to be erased on the MSG No. indicator
with the MSG No. increment/decrement switch.
Message numbers 00 through 60 can be specified.
If message number 00 is specified, all messages (01 through 60) are erased.
Set the mode selector to
ERA
ERASE Mode
Section 3-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com