22
3-3
REC Mode
Recording Procedure
Refer to
3-5 ERASE Mode.
Erase the unwanted message
using ERA mode.
Should a
certain message be re-
corded under another mes-
sage number?
Connect an input device (micro-
phone or tape recorder) to the
Voice Unit.
Set the line/microphone selec-
tor switch according to the input
device connected.
Set the memory protect switch
to the OFF position.
Clear all the memory using
ERA mode.
Set the mode selector switch to
REC.
Adjust the input level with the
volume control.
Select a message number by
using the MSG No. increment
or decrement switch.
Push the ST/SP switch once to
start recording.
Input messages from the micro-
phone or tape recorder.
Push the ST/SP switch again to
stop recording.
NO
YES
NO
YES
Record the additional message.
Recording ends.
Set the memory protect switch
to the ON position.
Refer to
3-5 ERASE
Mode.
Does the
recorded message need
to be changed?
End
Start
REC Mode
Section 3-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com