![background image](http://html.mh-extra.com/html/omron/sysmac-c200h-ov001/sysmac-c200h-ov001_operation-manual_1633422084.webp)
76
@MOV
#0001
110
00100
@MOV
#0511
111
@MOV
#0000
112
03001
03000
03001
DIFU
03000
00100
12014
MOV
#0001
120
03001
MOV
#2008
121
MOV
#0000
122
12014
11014 11901 11902
DIFU
11014
This command transfers the data
of the combined phrases to Voice
Unit 1 when input 00100 turns ON.
Differentiation of input 00100
This command maintains the ON
status of input 00100, it is can-
celed when the output command
of Voice Unit 2 is transferred.
This command transfers
the data of the combined
phrases to Voice Unit 2
when the output com-
mand (11014), Voice Unit
busy flag (11901), and
message output in prog-
ress flag (11902) of Voice
Unit 1 are OFF.
When input 00100 turns ON, Phrase nos. 5 and 11 of Voice Unit 1 and
Phrases nos. 20 and 8 of Voice Unit 2 are combined in this order and played
back.
Note Do not transfer any other combinations of phrases until input 00100 turns ON
and the data of this program has been completely transferred. To execute
this program, messages must not be stored in the output message areas of
the Voice Units.
Connect the output jack of Voice Unit 2 to the input jack of Voice Unit 1, and
then connect the output jack of Voice Unit 1 to a speaker. (Refer to
3-10 Mix-
ing Function.)
When one-shot operation is executed in sentence mode and phrase combi-
nation mode, the message is recognized at the leading edge of the output
command. Therefore be sure to turn OFF the output command once and
then back ON again to transfer a new message.
Notes on Program
Development
Phrase Combination Mode Example Programs
Section 4-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com