![background image](http://html.mh-extra.com/html/omron/sysmac-c200h-ov001/sysmac-c200h-ov001_operation-manual_1633422025.webp)
16
2Phrase Combination Mode
I/O
Word
Bit number
Bit name
Function
03 through 00
Number of
repetitions
These bits set the number of times a message is played
back in the one-shot operation mode. In level operation
mode this bit has no function. The repetition value can be
set from 0 through 9, or to F. When F is specified, the
message is played back repeatedly. When 0 is specified,
the message is played back only once. Values A to E if
specified, default to 9.
11 through 04
Repetition interval
These bits set (in BCD) the playback repetition interval.
Bits 11 through 08 set the digit to the left of the decimal
point ( 0 through 9 seconds) and bits 07 through 04 sets
the digit to the right of the decimal point (0.0 through 0.9
seconds). Note: if a non BCD value is specified the
repetition interval defaults to 0.0 second.
n
12
Priority command
When this bit is turned ON, reproduction of a message
under execution is stopped and the newest message,
which is transferred at the leading edge of the output
command is given priority and reproduced. The interrupted
message is reproduced again from the beginning after the
priority message has been reproduced.
13
---
Not used
14
Output command
A message consisting of specified phrases is played back
at the leading edge of this bit (i.e., from OFF to ON).
Output
15
Stop command
When this bit is turned ON message playback is
interrupted. While this bit is ON, messages cannot be
played back. When this bit is OFF, the message for which
an output command has been issued, or a message stored
in memory is played back. A message which has been
interrupted will not resume playback even if this bit is
turned OFF.
n+1
15 through 08
1st phrase no.
These bits make up a message by combining a set of
phrases. Set the numbers of the phrases to be reproduced
in the sequence in which the phrases are reproduced. If all
the 16 phrases are not used, set the number of the phrase
next to the last phrase to 00, which indicates the end of
combination of phrases.
07 through 00
2nd phrase no.
n+2
15 through 08
3rd phrase no.
07 through 00
4th phrase no.
n+3
15 through 08
5th phrase no.
07 through 00
6th phrase no.
n+4
15 through 08
7th phrase no.
07 through 00
8th phrase no.
n+5
15 through 08
9th phrase no.
07 through 00
10th phrase no.
n = 100 + 10 x unit no.
Bit Number Allocation
Section 2-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com