2-19
D
Other Precautions
•
Do not apply commercial power directly to the Servomotor. The Servomotors run on synchronous
AC and use permanent magnets. Applying 3-phase power will burn out the motor coils.
•
Do not carry or otherwise handle the Servomotor by its cable, otherwise the cable may become dis-
connected or the cable clamp may become damaged.
•
Take measures to prevent the shaft from rusting. The shafts are coated with anti-rust oil when
shipped, but anti-rust oil or grease should also be applied when connecting the shaft to a load.
•
Absolutely do not remove the encoder cover or take the motor apart. The magnet and the encoder
are aligned in the Servomotor. If they become misaligned, the motor will not operate.
System Design and Installation
Chapter 2
