3-15
3-5-1 Setting and Checking User Parameters (Cn-04 to 29)
H
Displaying User Parameters
Perform the following procedures on the Parameter Unit to display the user parameters.
D
Displaying with Handy-type (R88A-PR02U)
1. Press the MODE/SET Key to go into settings mode (
cn-
jj
).
2. Press the Direction Keys to display the desired user parameter number.
Press the Right and Left Keys to select the digit to be set. The digit whose value can be set will blink.
Press the Up and Down Keys to increment or decrement the digit.
3. Press the DATA Key to display the setting of the specified parameter.
4. Press the DATA Key again to return to the parameter number display.
Note If only the Up or Down Key is pressed at step 2., the parameter number can be set directly. In this
case, the rightmost digit will blink. The number cannot be set if the second digit (the 10s digit) is
blinking (i.e., blinking indicates the digit that can be changed).
D
Displaying with Mounted-type (R88A-PR03U)
1. Press the MODE/SET Key to go into settings mode (
cn-
jj
).
2. Press the Up and Down Keys to display the desired user parameter number.
The number will be incremented or decremented each time the Up or Down Key is pressed.
3. Press the DATA Key to display the setting of the specified parameter.
4. Press the DATA Key again to return to the parameter number display.
D
Parameter Display Example
c n - 0 4
0 0 0 8 0
[1]
[2]
[5]
[4]
DATA
DATA
Parameter Number Display
Data Display
H
Setting User Parameters
First, use the previous procedure to display the settings of the user parameter. Then use the following
procedures to set user parameters.
D
Making Settings with Handy-type (R88A-PR02U)
1. Use the Right and Left Keys to select the digit that is to be set. The digit for which the value can be
changed will blink.
2. Press the Up and Down Keys to change the value of the digit.
3. Repeat the previous two steps as required to set the parameter.
4. Press the MODE/SET or DATA Key. The parameter will be set and the display will blink.
5. Press the DATA Key again to return to the parameter number display.
Operation
Chapter 3
