manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 74

Item

Description

Details

I

OK button

Applies the changes and closes the window

J

Cancel button

Exits the utility

K

Apply button

Applies the changes

*1.

The Industrial Monitor Utility scans the connected USB devices and shows a list of connected monitors. If an
Industrial Monitor is not connected with the USB cable, it will not be found.

*2.

With a very low backlight brightness setting (15%-0%) the displayed information might not be visible in an envi-
ronment with high ambient light conditions. This prevents brightness adjustments with the Industrial Monitor Utili-
ty.

Additional Information

To adjust the backlight brightness when the brightness setting is set too low:

•

Bring the Panel PC in a low ambient light environment

•

Lighten the display with a bright flashlight

Installation

The Industrial Monitor Utility is pre-installed on the Industrial Box PC and the Industrial Panel PC.
Download the Industrial Monitor Utility from the OMRON download website for re-installation or for in-
stallation on another Industrial PC.
The Industrial Monitor Utility is installed onto Windows, and can be accessed via the Windows start
menu and the Industrial PC Tray Utility. Installing the Industrial Monitor Utility will also install the Indus-
trial PC Tray Utility.

Additional Information

Refer to 

3-2-7 Industrial PC Tray Utility 

on page 3 - 18 for Industrial PC Tray Utility details.

Compatibility

This monitor utility can be used on any PC that is connected to an OMRON Industrial Monitor.
This monitor utility can be used with:
• Windows Embedded Standard 7
• Windows 10

Additional Information

This monitor utility does not support 3rd party monitors.

Startup

The Industrial Monitor Utility can be started from:
• Windows Start Menu.

Select 

Omron

 and then 

Industrial Monitor Utility

.

• Industrial PC Tray Utility

3 Software

3 - 10

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands