Omron NYP17-*-11 SERIES User Manual Download Page 128

Page: 128 / 264

Mount the drive cover.
The lock lever will click when closed correctly.

Finalize the drive installation when the Panel PC installation is completed.
• If the drive is inserted in bay A:

(1) Install an operating system

(2) Power OFF and then Power ON

(3) Ensure the drive is functional and confirm normal operation.

If required set the drive as boot disk in the BIOS settings.
Refer to

A-1-5 BIOS - Boot

on page A - 10 for boot priority settings.

• If the drive is inserted in bay B:

(1) Ensure the drive is functional and confirm normal operation.

If the Panel PC has a Windows operating system and the storage drive is not visible in
Windows then the drive needs to be allocated.

The drive is installed and functional.

5 Installation

5 - 8

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Search results

Summary of Contents for NYP17-*-11 SERIES

Reviews:

Brands by name

Popular brands

Omron NYP17-*-11 SERIES, User Manual

Search results

Summary of Contents for NYP17-*-11 SERIES

Reviews:

Brands by name

Popular brands