manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 203

7-2

Corrective Maintenance

Corrective maintenance covers all actions to correct problems that cause downtime.

WARNING

Do not attempt to disassemble, repair, or modify the product in any
way. Doing so may result in malfunction or fire.

Contact your local OMRON representative if the corrective maintenance actions did not solve the
problem.

7-2-1

Warning and Error Messages

Warning and Error messages are provided by the Industrial Panel PC when there is a potential prob-
lem that may cause downtime. This section provides details about these messages.
Warning messages inform you about a situation that will lead to downtime of the Industrial Panel PC.
Error messages inform you about what caused the downtime of the Industrial Panel PC.

The following message channels are available.

LED Indicators

The ERR LED indicator provides information on warnings and errors.

Additional Information

Refer to 

ERR LED Indicator

 on page 2 - 6 for ERR details.

Industrial PC Support Utility

The Industrial PC Support Utility provides information on warnings and errors.

The Industrial PC Support Utility indicates:
• Internal temperature above setting

Check the status of the Fan Unit and check the ambient conditions.

• Low revolution speed of the Fan Unit

• Check for excessive dust on the fans and in the Fan Unit.
• If required replace the Fan Unit.

• Low battery status

Replace the battery.

7 Maintenance

7 - 13

NY-series Industrial Panel PC User's Manual (W555)

7-2
 Corrective Maintenance

7

7-2-1 W

arning and Error Messages

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands