Omron NYP17-*-11 SERIES User Manual Download Page 46

Page: 46 / 264

ERR LED Indicator

The Error LED (ERR) indicates the presence and type of an error within the Industrial Panel PC.

Color

Status

Meaning

Red

Not lit

•

The 24 VDC power is not supplied

•

No error is present

Blinking

•

Fan Error

•

Battery low

Lit

•

Thermal shutdown

•

Watchdog Error

•

Power Supply undervoltage error

•

Power Supply overvoltage error

•

Power supply defective

Additional Information

• The status of this LED can also be defined by users using the Industrial PC System API.

Refer to

3-3-2 Industrial PC System API

on page 3 - 25 for Industrial PC System API details.

• Refer to

7-2 Corrective Maintenance

on page 7 - 13 for actions to solve errors.

HDD LED Indicator

The Hard Disk Drive LED (HDD) indicates activity of the HDD or SSD.

Color

Status

Meaning

Yellow

Flickering

The HDD or SSD is active.

RUN LED Indicator

The RUN LED is available for user applications.

Color

Status

Meaning

Green

Not lit

User-defined.
The status can be defined in a user program using the
Industrial PC System API.

Blinking

Lit

Additional Information

Refer to

3-3-2 Industrial PC System API

on page 3 - 25 for Industrial PC System API details.

2 Hardware

2 - 6

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Search results

Summary of Contents for NYP17-*-11 SERIES

Reviews:

Brands by name

Popular brands

Omron NYP17-*-11 SERIES, User Manual

Search results

Summary of Contents for NYP17-*-11 SERIES

Reviews:

Brands by name

Popular brands