manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 129

5-2-2

Install the PCIe Card

Prepare the following items:
• The PCIe Card.

A PCIe Card is not supplied with the Panel PC.

Additional Information

Refer to 

4-1-7 PCIe Card Specifications

 on page 4 - 10 for PCIe specifications.

• The PCIe Card mounting material: Card Support.

This item is supplied with the Panel PC.

To install the PCIe Card:

1

Ensure the Panel PC is OFF.

2

Remove the two crosshead screws 

1

 indicated with "open" and then pull up 

2

 the PCIe

Drawer.
The indent at the side of the drawer will help you to pull the drawer from the Panel PC.

2

1

1

5 Installation

5 - 9

NY-series Industrial Panel PC User's Manual (W555)

5-2 Install Options

5

5-2-2 Install the PCIe Card

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands