Omron NYP17-*-11 SERIES, User Manual

Page: 193 / 264

Periodically but at least every 6
months
Reference
Check the battery replacement date
on the label at the inside of the cov-
er.
Replace the battery before the re-
placement date.
•
Refer to 7-2-2 Remove the Cover on page 7 - 15 to check the label.
•
Refer to 7-2-4 Replace the Battery on page 7 - 18 to replace the bat-
tery.
Check the backup and repair me-
dia. Refer to 7-1-7 Check the Backup and Repair Media on page 7 - 11 for
details.
When the Industrial Panel PC is
not powered for 6 months
Reference
Confirm both fans rotate immedi-
ately after Power ON.
Replace the Fan Unit when the
fans do not rotate smoothly. Refer to 7-2-3 Replace the Fan Unit on page 7 - 16 to replace the Fan
Unit.
7-1-2
Clean the Touchscreen Surface
Clean the touchscreen surface of the Industrial Panel PC when necessary to keep it in the best oper-
ating condition.
• Ensure the Industrial Panel PC is OFF before cleaning.
• Wipe the Industrial Panel PC daily with a dry, soft cloth. If the touchscreen is very dirty and you try to
clean it with a dry cloth, you may scratch the surface. Use a damp cloth first to remove the dirt.
• When a spot cannot be removed with a dry cloth, dampen the cloth with a neutral cleanser (an ap-
proximately 2% solution), wring out the cloth, and wipe the Industrial Panel PC.
• Remove all residue from gum, vinyl or tape when cleaning.
Precautions for Correct Use
Turn OFF the product or disable the touchscreen for cleaning.
7-1-3
Clean the Panel PC
Clean the Panel PC periodically in order to keep it in the best operating condition.
Wipe the Panel PC with a dry, soft cloth.
Precautions for Safe Use
Do not use corrosive substances to clean the product.
Doing so may result in the failure or malfunction.
7 Maintenance
7 - 3
NY-series Industrial Panel PC User's Manual (W555)
7-1 Preventive Maintenance
7
7-1-2 Clean the T
ouchscreen Surface