Omron NYP17-*-11 SERIES, User Manual

Page: 75 / 264

Configuration
The Industrial Monitor Utility can be configured with following options:
Configuration item Description
Language Follows the Windows language configuration when that language is supported for the
Industrial Monitor Utility. The default language English (EN-US) will be used if the lan-
guage configured in Windows is not supported.
Monitor identification If enabled, the Status LED indicator on the selected Industrial Monitor will flash for 3
seconds.
To enable:
(1) Open the Windows registry key HKEY_LOCAL_MACHINE\SOFTWARE
\Wow6432Node\Omron\IPC\MonitorConfiguration
(2) Set the registry value Indicate to value True.
Messages
The Industrial Monitor Utility can use the Industrial PC Tray Utility to display following messages:
Message type Message Description
Info Connected A new monitor connected
•
USB cable connected
•
Monitor powered ON
Warning Not Connected Monitor disconnected
•
USB cable disconnected
•
Monitor powered OFF
Warning Video Discon-
nected DVI cable disconnected or NY Monitor Link cable disconnected
Warning No Signal DVI cable connected but no signal detected
Logging
There is logging in the Windows event log of the following utilities:
• Industrial Monitor Utility
In the Windows Event Viewer filter for event source IndMonService .
• Industrial Monitor Brightness Utility
In the Windows Event Viewer filter for event source IndMonService .
• Industrial PC Support Utility
In the Windows Event Viewer filter for event source IPCServiceHost or OMRON Industrial PC
Support Utility .
Additional Information
Refer to 7-2-9 Windows Event Viewer on page 7 - 38 for the logged messages.
3 Software
3 - 11
NY-series Industrial Panel PC User's Manual (W555)
3-2
Support Software
3
3-2-4 Industrial Monitor Utility