manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 177

5-9

Create Backup and Repair Data

Ensure the operating system, software and data can always be restored when required.

Precautions for Correct Use

Create backups according to the preventive maintenance schedule to prevent data loss and
system integrity issues.
Refer to 

7-1-1 Preventive Maintenance Schedule

 on page 7 - 2 for intervals.

Recommended software to create a backup is the Rescue Disk Utility.

 This software creates a

system backup on a USB storage device. A system backup contains the Windows partition, the boot
partition and the MBR. A system restore action will restore the Windows partition, the boot partition
and the MBR of the Panel PC.
The Rescue Disk Utility allows:
• Create Backup

The creation of a system backup.

• Restore Backup

A system restore to bring the system back to the condition it was in when the Rescue Disk backup
was created.

Additional Information

• The Rescue Disk Utility can only:

• backup or restore the system

A backup or restore from any other partition or storage device is not possible.

• do a complete system backup or complete system restore

A partial backup or a partial restore of a partition is not possible.

• Refer to 

3-2-6 Rescue Disk Creator

 on page 3 - 14 for Rescue Disk Creator details.

• Refer to 

5-9-1 Create a New Rescue Disk with the Rescue Disk Creator

 on page 5 - 58 for

Rescue Disk creation details.

• Refer to 

Create a System Backup with the Rescue Disk

 on page 7 - 7 for system backup

details.

The standard Windows Backup and Restore features can be used. The Windows software can create
and restore full backups and partial backups. These backups can be created automatically at prede-
fined intervals.
The Windows Backup and Restore allows:
• Creation of a Windows Backup

Creates a backup of a user's selection of folders and the option to create a system image of a drive.
This backup:
• Can not include the MBR and the Windows partition.
• Can include data from another partition than the Windows partition.
• Can include data from another storage device than the device with the Windows partition.
.

• Creation of a Windows System Repair Disk.

5 Installation

5 - 57

NY-series Industrial Panel PC User's Manual (W555)

5-9 Create Backup and Repair Data

5

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands