manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 220

7-2-7

Restore and Repair Data

Depending on the available backup and repair data an applicable restore or repair action can be se-
lected.

Use following actions to restore or repair your Panel PC.
• Restore the Windows partition, the boot partition and the MBR to the moment the selected Rescue

Disk was created.
This is a system restore with the Rescue Disk.
Refer to 

Restore a System Backup with the Rescue Disk

 on page 7 - 31 for system restore details.

• Restore a user's selection of folders to the moment the selected Windows backup was created.

Refer to 

Restore a Custom Backup with Windows

 on page 7 - 33 for Windows restore details.

• Repair Windows.

Refer to 

Repair Windows with the System Repair Disk

 on page 7 - 36 for Windows repair disk de-

tails.

Additional Information

Contact your OMRON representative when the Panel PC needs to be restored and you do not
have a system backup.

7 Maintenance

7 - 30

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands