manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 223

Restore a Custom Backup with Windows

Use the following procedure to restore a custom backup of user files with Windows Backup and Re-
store.

Additional Information

• With Windows Backup and Restore it is not possible to restore the complete boot disk or the

operating system. Use the Windows Repair Disk to repair the Windows operating system.
Refer to http://windows.microsoft.com/ for Backup and Restore details.
Refer to 

Restore a System Backup with the Rescue Disk

 on page 7 - 31 for Repair Disk de-

tails.

• Refer to 

Create a Custom Backup with Windows Backup

 on page 7 - 9 for Custom Backup

details.

• Use the Windows System Repair Disk to repair the Windows operating system when Win-

dows can not be started.
Refer to 

Repair Windows with the System Repair Disk

 on page 7 - 36 for repair details.

Ensure:
• The Industrial Panel PC is ON
• You are logged in
• A backup is created earlier and it is available

To restore a backup:

1

Select the Windows 

Start

 Button.

2

In the search field, input 

Backup

.

3

Select 

Backup and Restore

.

The Backup and Restore window opens.

7 Maintenance

7 - 33

NY-series Industrial Panel PC User's Manual (W555)

7-2
 Corrective Maintenance

7

7-2-7 Restore and Repair Data

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands