manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 48

Logo LED

The Logo LED brightness can be changed with the Industrial Monitor Utility.

Additional Information

The Logo LED brightness is adjustable.
Refer to Industrial Monitor Utility for brightness details.
The Industrial Monitor Utility information is available:
• For products 

NYM

£

 in the section 

Software

 in this manual.

• For products 

NYP

£

 in the section 

Support Software

 in this manual.

• For products 

NY5

£

 in the 

NY-series IPC Machine Controller Industrial Panel PC / Industrial

Box PC Setup User’s Manual (Cat. No. W568)

Status LED Indicator

The Status LED indicator provides information about the operating condition of the Industrial Panel
PC.

Color

Status

Meaning

None

Not lit

One of the following situations:

•

The 24 VDC power is not supplied.

•

Normal operation

•

Turned OFF by the Industrial Monitor Utility.

Green

Blinking

Power is currently supplied and the Industrial Panel PC is in stand-by
mode.

Red

Blinking

One of the following situations:

•

Fan Error

•

Battery low

Red

Lit

At maximum brightness in following situations:

•

Power supply undervoltage error

•

Power supply overvoltage error

•

Power supply defective

•

Monitor internal hardware error

At controllable brightness in following situations:

•

Thermal shutdown

•

Watchdog Error

Additional Information

• Refer to Industrial Monitor Utility information for brightness adjustment details.
• For Panel PCs without Machine Controller Software the status of this LED can also be de-

fined by the Industrial Monitor API.

• The Industrial Monitor Utility information and the Monitor API information are available:

• For products 

NYP

£

 in the section 

Support Software

.

• For products 

NY5

£

 in the 

NY-series IPC Machine Controller Industrial Panel PC / Industrial

Box PC Setup User’s Manual (Cat. No. W568)

• NY-series Software Development Kit User's Manual

2 Hardware

2 - 8

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands