manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 53

2-7

Connectors

This section gives an overview of the available connectors for the Industrial Panel PC.

2-7-1

Power Connector

The power connector on the Panel PC is used to supply 24 VDC power to the Panel PC.
The power connector is supplied with the Panel PC.

Additional Information

• Refer to 

4-2-1 Power Connector Specifications

 on page 4 - 12 for specifications.

• Refer to 

5-4-3 Wire the Power Connector

 on page 5 - 34 for wiring details.

• Refer to 

5-5 Connect

 on page 5 - 40 for connection details.

2-7-2

I/O Connector

The I/O connector on the Industrial Panel PC provides discrete signals with the following functions.
• Input signal to the Panel PC when a connected UPS switches to battery power.
• Input signal to the Panel PC to perform a shutdown or power ON when the signal turns ON.
• Output signal from the Panel PC to indicate the power status of the Panel PC.
The I/O connector is supplied with the Panel PC.

2 Hardware

2 - 13

NY-series Industrial Panel PC User's Manual (W555)

2-7 Connectors

2

2-7-1 Power Connector

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands