3
Connect the I/O connector.
Hold the black part
A
when inserting the connector, this enables the auto-locking mechanism.
B
A
Do not tilt the orange levers
B
because this will unlock the connector.
4
Connect the DVI connector to an external monitor such as the Industrial Monitor and tighten
the fastening screws.
For an Industrial Panel PC this is optional because a monitor is integrated.
5
Connect a device to the optional interface (DVI or RS-232C) if applicable and tighten the fas-
tening screws.
6
Connect the USB ports to peripheral devices .
7
Connect the Panel PC to the required Ethernet interface connector(s).
Refer to
4-2-4 Ethernet Connector Specifications
on page 4 - 18 for Ethernet port details.
The Panel PC is connected.
5 Installation
5 - 43
NY-series Industrial Panel PC User's Manual (W555)
5-5 Connect
5
5-5-2 Connection Procedure
Summary of Contents for NYP17-*-11 SERIES
