manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 214

9

Insert the metal shielding cover.

10

Mount the drive cover.
The lock lever will click when closed correctly.

11

Restore the drive data.
• For products 

NYB

£

 and 

NYP

£

:

• For an Industrial PC with RTOS Controller restore the drive data from a backup.
• For an Industrial PC without Operating System restore the drive data from a backup.
• For an Industrial PC with a Windows operating system refer to the restore procedure in the

section 

Corrective Maintenance

 to restore data.

• For products 

NY512-A

£

 refer to the restore procedure in the section 

Corrective Mainte-

nance

 to restore data.

• For products 

NY512-1

£

 refer to the 

NY-series IPC Machine Controller Industrial Panel PC /

Industrial Box PC Setup User’s Manual (Cat. No. W568)

 to restore data from a backup.

12

Finalize the drive replacement.
If the Panel PC has a Windows operating system and the storage drive is not visible in Win-
dows then the drive needs to be allocated.

The drive is replaced.

7 Maintenance

7 - 24

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands