manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 76

3-2-5

Industrial Monitor Brightness Utility

This section provides an overview of the Industrial Monitor Brightness Utility.

Industrial Monitor Brightness Utility

The Industrial Monitor Brightness Utility is a software utility that allows you to control the brightness of
the screen backlight of all connected Industrial Monitors.

A

B

Item

Description

Details

A

Backlight brightness slider Use the slider to control the display brightness of all connected Industrial

Monitors.

B

Industrial Monitor Utility

Button to start the Industrial Monitor Utility.

With a very low backlight brightness setting (15%-0%) the displayed information might not be visible in
an environment with high ambient light conditions. This prevents brightness adjustments with the In-
dustrial Monitor Brightness Utility.

Additional Information

To adjust the backlight brightness when the brightness setting is set too low:
• Bring the Panel PC in a low ambient light environment
• Lighten the display with a bright flashlight

Compatibility

This monitor utility can be used on any PC that is connected to an OMRON Industrial Monitor.
This monitor utility can be used with:
• Windows Embedded Standard 7
• Windows 10

Additional Information

This monitor utility does not support 3rd party monitors.

3 Software

3 - 12

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands