Omron NYP17-*-11 SERIES User Manual Download Page 192

Page: 192 / 264

7-1

Preventive Maintenance

Preventive Maintenance covers all actions that prevent downtime.

7-1-1

Preventive Maintenance Schedule

Prevent unscheduled downtime with the following preventive maintenance schedule.

Daily

Reference

Check Industrial Panel PC status

•

Refer to

7-2-1 Warning and Error Messages

on page 7 - 13 for all

available messages.

•

Refer to

2-2 LED Indicators

on page 2 - 5 for LED details.

Monitor storage devices that do not
comply to the Omron specifications

Refer to

Storage Device Considerations

on page 2 - 20 for details.

Clean the display

Refer to

7-1-2 Clean the Touchscreen Surface

on page 7 - 3 for display

cleaning details.

Weekly

Reference

Clean the Panel PC

Refer to

7-1-3 Clean the Panel PC

on page 7 - 3 for cleaning details.

Ensure you have the latest soft-
ware updates

Refer to

7-1-5 Keep Software Updated

on page 7 - 4 for update details.

When changing applications or

configurations

Reference

Create a backup of the Industrial
Panel PC

Refer to

5-9 Create Backup and Repair Data

on page 5 - 57 for backup

details.

Periodically but at least every 6

months

Reference

Check the ambient environment:

•

Temperature and humidity within
specifications

•

Noise sources not close to the
Industrial Panel PC

Refer to

4-5 Environmental Specifications

on page 4 - 25 for environmen-

tal specifications.

Check installation:
Industrial Panel PC mounted se-
curely

Refer to

5-3 Mount

on page 5 - 14 for installation details.

Check wiring and connections:

•

Cable connectors fully inserted
and locked

•

No damaged wiring or connec-
tors

Refer to

5-4 Wire

on page 5 - 27 for wiring details.

Refer to

5-5 Connect

on page 5 - 40 for connection details.

Check the gasket behind the moni-
tor rim

Refer to

7-1-4 Check the Gasket Seal

on page 7 - 4 for gasket details.

Check the display:

•

Brightness is sufficient

•

No touch offset

Refer to

4-4 Display Specifications

on page 4 - 24 for display specifica-

tions.
Refer to

Industrial Monitor Brightness Utility

on page 3 - 12 for brightness

details.
Refer to

Calibrate Touchscreen

on page 7 - 43 for calibration details.

7 Maintenance

7 - 2

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Search results

Summary of Contents for NYP17-*-11 SERIES

Reviews:

Brands by name

Popular brands

Omron NYP17-*-11 SERIES, User Manual

Search results

Summary of Contents for NYP17-*-11 SERIES

Reviews:

Brands by name

Popular brands