manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 89

3-3-2

Industrial PC System API

This section describes some of the Industrial PC System API functions.
The Industrial PC System API allows programmers to create programs that can retrieve information or
set an indicator status of the product.
The API makes use of the included OMRON IPC System Service to manage the hardware.

Features

The Industrial PC System API can:
• Retrieve product information from the Industrial PC
• Retrieve system flags
• Retrieve maintenance information

• Configure and program the Watchdog

*1

• Set the status of the Run LED Indicator and the ERR LED Indicator

*1

*1 Only for
• Industrial Box PCs with a Windows operating system.

These are:
• NYB

££

-

££

1

££

• NYB

££

-

££

2

££

• NYB

££

-

££

3

££

• Industrial Panel PCs with a Windows operating system.

These are:
• NYP

££

-

££

1

££

-

££££££££

• NYP

££

-

££

2

££

-

££££££££

• NYP

££

-

££

3

££

-

££££££££

Installation

The Industrial PC System API is part of the SDK download.
The Industrial PC System API is pre-installed on the Industrial Panel PC and the Industrial Box PC.
Install the Industrial PC System SDK to use the Industrial PC System API on development PCs.
Use the Merge Module to include the Industrial PC System API in the installer for custom applications.
To use the Industrial PC System API the API needs to be referenced in your development project.

3 Software

3 - 25

NY-series Industrial Panel PC User's Manual (W555)

3-3 Software for Developers

3

3-3-2 Industrial PC System API

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands