manualshive.com logo in svg

Omron NYP17-*-11 SERIES, User Manual

Share
Download
Omron NYP17-*-11 SERIES User Manual Download Page 82

3-2-7

Industrial PC Tray Utility

This section provides an overview of the Industrial PC Tray Utility.

Industrial PC Tray Utility Overview

The Industrial PC Tray Utility is a software utility that provides information about the current state of
the Industrial PC, its related devices, and associated software.

When running, the Industrial PC Tray Utility is always present as a status icon 

A

 in the system tray

area 

B

 of Windows.

A

B

Windows 10

Features

The Industrial PC Tray Utility provides the following features:
• Display the overall state of all installed OMRON utilities in the icon in the system tray area.
• Display a menu that can start all installed utilities and show the state of each installed utility.
• Display notification messages in popup windows that inform the user about the state of applications

or hardware. The Industrial PC Tray Utility displays the messages provided by installed OMRON
utilities. Refer to the OMRON utilities information for the messages that can be displayed.

Menu

Select the Industrial PC Tray Utility icon 

F

 to display the menu.

B

C

E

F

D

A

• The application displays the available utilities.

• Select an entry to launch the associated utility, if applicable.

3 Software

3 - 18

NY-series Industrial Panel PC User's Manual (W555)

Summary of Contents for NYP17-*-11 SERIES









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands