Omron K3TS, Operation Manual

Page: 88 / 97

*
Appendix B
Sensor Models
The following lists the applicable sensor models that can be used with the K3TS Intelligent Signal Processor
along with the K3TS factory-set parameters associated with the use of these sensors. Examples of prescaling
settings are also given.
Applicable Sensors
The following list provides some typical examples of connectable OMRON Sensors. For further details, please
refer to the OMRON sensor catalog.
Linear Sensors
Sold separately.
Displacement Sensors
Sensor Model description
X
1
Y
1
X
2
Y
2
Decimal
LED
displacement
sensor Z4W-V25R
## ##
21 to 29 mm
(25
±
4 mm)
Laser
displacement
sensor Z4W-A2
## ##
45 to 55 mm
(50
±
5 mm)
Laser
displacement
meters 3Z4M-J1001-
## ##
30 to 50 mm
(40
±
10 mm)
meters
3Z4M-J2001-
(See note)
## ##
30 to 50 mm
(40
±
10 mm)
3Z4M-J1222-
### #
70 to 130 mm
(100
±
30 mm)
3Z4M-J2222-
(See note)
! ### #
70 to 130 mm
(100
±
30 mm)
Laser
displacement
sensors
Z4M-W40
## ##
30 to 50 mm
(40
±
10 mm)
sensors
Z4M-W100
### #
60 to 140 mm
(100
±
40 mm)
Parallel-beam
linear sensor Z4LA-1030
## ##
0 to 10 mm
(sensing width)
Ultrasonic
displacement
sensors E4DA-LS
E4DA-WL1C
(See note)
## ##
30 to 70 mm
(50
±
20 mm)
Note The maximum output range of the 3Z4M-J2 is
±
10 V. However, since the input range for K3TS
scaling is
±
9.999 V, the output range of the 3Z4M-J2 is set to
±
5.000 V (50% output). Yet there is
no scaling error, even if the output range exceeds 50%.