Omron K3TS, Operation Manual

Page: 13 / 97

%
No. Functions Name
6 Bank indicators To alter the set value without key operation, select another bank when making a level
change. The K3TS has eight banks; each bank can output HH, H, L, and LL set values.
The selected bank is displayed in the binary system.
7 Unit Attach the appropriate label (use the labels supplied as accessories).
8 Operation
Keys
Level Key
Selects the setting mode, in which the setting levels can be changed. For details on the
setting levels, refer to
6-1 Before Setting the Parameters.
Display
Key
Displays a set value on the SV display.
In the setting mode, after a parameter is selected with the Shift Key, the selected
setting is enabled or disabled or the set value is written to memory with this key.
Setting
status 1 Setting
status 2
Parameter
display
L, H LL, HH
Shift Key
Shifts the digit where the set value is to be changed.
Selects a parameter at each setting level.
For details on the setting parameter, refer to Section 6 Parameter Setting and
Operation.
Parameter 1 Parameter 2 Parameter n
Up Key
Increases the value of the current digit in the set value by one.
DATA
TEACH
Key
Selects the process value, possible display shift status (*1), maximum value (*2), or
minimum value (*2).
*1: Available only if the model incorporates a shift function.
*2: Available only when operating parameter 3 is in the normal setting.
In the setting mode, effects the teaching function. With this function, the comparison
value, scaling value, and linear output range are set by means of actual input. For
details on the teaching function, refer to
6-3-2 Special Functions.
Process
value
Minimum
value
Maximum
value
Possible
display
shift status
Section 2-1