Omron K3TS, Operation Manual

Page: 78 / 97

%!
8-3 Measurement of Plate Thickness
The following operations are possible with the K3TS:
•
Using two displacement sensors, the plate thickness can be measured by
setting operating parameter to K -- (A + B) and by converting the outputs of
the displacement sensors into actual figures (the thickness of the plates).
•
With the forced zero function, object thickness can be compared with that
of a standard object and the deviation can be measured with ease.
Settings
Level 3
(K -- (A + B))
(No previous average comparison)
(Normal)
Level 2
(4 to 20 mA)
---
Level 1
to (Example: Checks if the objects are within a thickness of 20
(standard thickness)
±
0.5 mm.)
=
=
=
=
(Adjust according to the object)
=
If X
2
= 8.00, Y
2
= 42.00
If X
1
= 40.00, Y
1
= 58.00
(Input the results of operation for X and Y.)
(Set the standard sensor distance in mm.)
(set to if necessary, after all setting operations terminate.)
“---” stands for a parameter that is not displayed.
" #% ! ,
Section 8-3