Omron K3TS, Operation Manual

Page: 21 / 97

&
4-1 Dimensions
91
96 12 130
44
43
48
90
All dimensions are in millimeters.
4-2 Panel Mounting
The mounting dimensions of the Intelligent Signal Processor conform to DIN
43700. Recommended panel thickness is 1 to 3.2 mm. Attach the mounting
brackets supplied as accessories to the Intelligent Signal Processor from be-
hind and tighten the mounting screws of the brackets to a torque of 5 kgf
cm (0.49 N m).
Whenever possible, keep the Intelligent Signal Processor horizontal. Do not
install the Intelligent Signal Processor where it will be exposed to corrosive
gases (especially sulfurized gas and ammonia gas). Do not install the Intelli-
gent Signal Processor where it will be subject to vibration, shock, dust, or
high humidity. The ambient temperature of the installation site must be within
--10
°
to 55
°
C.
120 min.
75 min.
Panel Cutout
All dimensions are in millimeters.
45
+0.8
/
--0
92
+0.8
/
--0
Note: Attach mounting bracket before wiring the terminals. When removing the In-
telligent Signal Processor, first disconnect the wiring, then remove the mount-
ing bracket.
! "#$
Section 4-2