Omron K3TS, Operation Manual

Page: 44 / 97

(
Display Refresh Period
The alteration of the display refresh period does not change the sampling
range. The comparative outputs and BCD data are updated in synchroniza-
tion with the sampling range. The display refresh period parameter will not
appear when the sampling hold, maximum hold, minimum hold, or peak-to-
peak hold parameter is set on operating parameter 3.
Setting
Refreshed every 0.1 s
Refreshed every 1.0 s
Refreshed every 2.0 s
Refreshed every 3.0 s
Refreshed every 4.0 s
RUN mode
Press and hold the Level Key for 2 seconds to select level 1.
Setting level 1
Setting level 2
Press and hold the Level Key and Up Key simultaneously
for 1 second to select level 2.
Press the Display Key.
LED Models Thumbwheel Switches Models
Press the Up Key to select and display and one of , , , and press the
Display Key to terminate the input operation.
Press and hold the Level Key for
1 second to return to level 1.
Press and hold the Level Key for
1 second to return to RUN mode.
Press the Shift Key several times to display .
! $
Section 6-2