Omron K3TS, Operation Manual

Page: 40 / 97

6-2-6 TIMING-delay
The TIMING-delay function is available only when the K3TS is set to ,
, , or on operating parameter 3. With the TIMING-delay function,
the time immediately after the TIMING input is turned ON until the start of
pulse counting operation can be freely set within a range of 0.00 to 1.99 s.
The following diagram illustrates the procedure for TIMING-delay time set-
ting:
Setting range to
Press and hold the Level Key for
1 second to return to RUN mode.
Press and hold the Level Key
for 1 second to return to level 1.
RUN mode
Press and hold the Level Key for 2 seconds to select level 1.
Setting level 1
Setting level 2
Press and hold the Level Key and Up Key simultaneously
for 1 second to select level 2.
Press the Display Key.
LED Models Thumbwheel Switches Models
Press the Shift Key several times to display .
Press the Up Key and Shift Key to write the TIMING-delay value and press the Dis-
play Key.
! $
Section 6-2