Omron K3TS, Operation Manual

Page: 64 / 97

(
Prescaling Value The teaching function of the K3TS can be set only when is set using
operating parameter 3. With the teaching function, a prescaling value can be
set as a set value. In order to perform this operation, follow the instructions
outlined in the flow diagram which show how to change set value X
2
from
to .
Setting level 1
Press and hold the Level Key for 2 seconds to select level 1.
RUN mode
Press and hold the Level Key for
1 second to return to RUN mode.
Press the Display Key.
LED Models Thumbwheel Switches Models
Press the Shift Key several times until is displayed.
Press the DATA TEACH Key. The present measured value will be displayed. (The X
2
,
LED indicator blinks. Zero suppress is displayed.
Press the DATA TEACH Key again. Measurement is halted and the value displaced
immediately before the key was pressed is displayed.
Press the Display Key to write the X
2
value. Input the Y
2
value and press the Display Key.
Press the Display Key. Input Y
1
and press the Display Key. Input the decimal
and press the Display Key to terminate the input operation for all scaling values.
Repeat the 1 through 3 operations to write the X
1
value.
(1)
(2)
(3)
#
Section 6-3