Omron EJ1 - 07-2008, Operation Manual

Page: 162 / 198

143
Maintenance Section 8-2
2. Toggle pin 6 of the of the DIP switch of the DeviceNet Communications
Unit from OFF to ON (leave ON for 1 to 5 seconds) and then turn OFF
again (while pin 6 is ON, the TS indicator will be flashing green). The data
will start downloading and the TS indicator will flash green. (Approx. 10 s
is required for each Temperature Controller.)
■
Execution Results
• When the download completes normally, the TS indicator status returns to
be lit green.
• When the download operation ends abnormally, after error completion,
the TS indicator will flash red for 10 s.
Note 1. For the download operation, when pin 6 (copy) is turned ON, the TS indi-
cator will flash green (indicating download standby). Check that the TS in-
dicator is flashing green before turning OFF pin 6 (copy) again.
2. To cancel a download operation, leave pin 6 (copy) ON for at least 5 sec-
onds, and then turn OFF again.
3. Check that data is downloading by confirming that the TS indicator flashes
green after pin 6 (copy) is turned OFF.
Copy operation mode setting
Start copying
Turn ON
pin 3
Leave pin 6 ON
for 1 to 5 s
Indicators
Lit green Flashing green Flashing green
TS
123456 123456 123456
NO NO NO
TS TS