Omron EJ1 - 07-2008, Operation Manual

Page: 113 / 198

94
Operations from the Edit Device Parameters Window Section 5-2
This icon indicates a parameter that is read only.
b) The Temperature Controller parameters are stored even if the
power is turned OFF.
3. Select the tab page of the channel for which the parameters are to be ed-
ited, and edit the parameters.
4. Click the parameter to be edited, and change the contents.
Note a) Click the Download Button to download all parameters. When this
operation is performed, the Unit will be reset, so do not use this op-
eration while the Unit is in RUN mode.
b) By clicking the Button in the Parameter Group field, the dis-
played parameters can be changed as follows:
• All parameters
• Parameters that can be changed during operation
• Parameters that can be changed when operation is stopped.
c) Click the Default Setting Button to return parameters to the fac-
tory settings.
d) Click the Upload, Download, Compare, and Default Setting But-
tons in the Edit Unit Parameters Window to perform operations on
the parameters for the specified channel only.
e) Use the Download can be changed during operation Button to
download parameters that can be changed during operation. The
Unit will not be reset.
5. Click the OK Button.
The display will return to the Edit Device Parameters Window for the De-
viceNet Communications Unit.
Note All the new settings will be canceled if the Cancel Button or But-
ton is clicked to exit the window. Always exit the window by clicking
the
OK Button.
6. To continue editing the parameters of other Temperature Controllers, re-
peat the procedure from step 1.