123
Sending Explicit Messages
Section 6-5
6-5-5
Copy Function
Use the following procedure to execute the copy function.
1,2,3...
1.
Send the COPY command.
2.
After receiving the response, wait for processing to be completed (approx.
10 s per Temperature Controller).
3.
Read the status to confirm that the copy function is stopped. If bit 1 of the
leftmost byte is ON, the copy function is still being executed. If it is OFF, the
copy function is stopped.
4.
Read the status again and confirm the results (rightmost byte). The mean-
ing of each bit of the rightmost byte is as follows:
Bit 0: ON for a normal end. (OFF for an error end or when the copy func-
tion has not been executed.)
Bit 1: OFF
Bit 2: ON if a communications error occurred when starting the upload or
download.
Bit 3: ON if an EEPROM hardware error or checksum error occurred when
starting the upload or download.
Bit 4: ON if a communications error occurred when executing the upload
or download.
Bit 5: ON if there was no backup data to download.
Bit 6: ON if the backup data configuration does not match the actual con-
figuration for an upload or download.
Bit 7: OFF
Explicit
message
Read/
write
Function
Command
Response
Service
code
Class
ID
Instance
ID
Attribute
ID
Data size
COPY
Write
Uploads or downloads
settings of the Temper-
ature Controller con-
nected to the
DeviceNet Communi-
cations Unit. (Refer to
page 141.)
10 hex
95 hex 01 hex
C6 hex
1 byte
00 hex: Upload
01 hex: Download
---
STATUS
Read
Reads the operating
status of the copy
function.
0E hex
71 hex 01 hex
66 hex
---
6 bytes (Bit 1 of
the leftmost byte
is the operating
status. The
rightmost byte is
the results.)
Summary of Contents for EJ1 - 07-2008
