29
Installation
Section 3-2
PFP-50N (50 cm)/PFP-100N (100 cm) DIN Rail
PFP-M End Plates (
×
2)
Mounting Direction
The mounting direction of the Temperature Controllers is fixed. Position the
DIN Rail vertical to the ground, as shown in the following diagram.
Mounting the Unit
Pull down the hooks on the bottoms of the Units, and then catch the hooks on
the tops of the Units onto the DIN Rail and press the Units onto the DIN Rail
until they lock into place.
Vertical: OK
Horizontal: NG
2. Catch the upper hooks onto the DIN Rail.
3. Press in on the Units.
1. Pull down the hooks.
4. Make sure the Units are
locked into place.
Summary of Contents for EJ1 - 07-2008
