Omron EJ1 - 07-2008, Operation Manual

Page: 78 / 198

59
Allocating I/O from the Configurator Section 4-3
Note Can be used with TC2, but not with TC4.
4-3-4 Input Data
Input data that is specific to the DeviceNet Communications Unit and that is
not allocated in the Temperature Controller variable area is described here.
TC4 and TC2
Output Completed Flags
Yes Yes Present Bank Alarm Value 3 42 (2A hex)
Yes Yes Present Bank Alarm Upper Limit Value 3 43 (2B hex)
Yes Yes Present Bank Alarm Lower Limit Value 3 44 (2C hex)
Yes Yes Input Digital Filter 45 (2D hex)
Yes Yes Input Value for Input Correction 46 (2Ehex)
Yes Yes Input Shift 1 47 (2F hex)
Yes Yes Input Value 2 for Input Correction 48 (30 hex)
Yes Yes Input Shift 2 49 (31 hex)
Yes Yes MV at PV Error 50 (32 hex)
Yes Yes MV at Stop 51 (33 hex)
Yes Yes MV Upper Limit 52 (34 hex)
Yes Yes MV Lower Limit 53 (35 hex)
Yes Yes Hysteresis (Heating) 54 (36 hex)
Yes Yes Hysteresis (Cooling) 55 (37 hex)
Yes Yes Alpha 56 (38 hex)
Yes Yes Manual MV 57 (39 hex)
Yes Yes SP Upper Limit 58 (3A hex)
Yes Yes SP Lower Limit 59 (3B hex)
Yes Yes Disturbance Gain 60 (3C hex)
Yes Yes Disturbance Time Constant 61 (3D hex)
Yes Yes Disturbance Rectification Band 62 (3E hex)
Yes Yes Disturbance Judgement Width 63 (3F hex)
Yes Yes Heater Burnout 1 Detection (See note.) 64 (40 hex)
Yes Yes HS Alarm 1 (See note.) 65 (41 hex)
Yes Yes Heater Overcurrent 1 Detection
(See note.) 66 (42 hex)
Yes Yes Proportional Band (Cooling, Current
Bank) 91 (5B hex)
Yes Yes Integral Time (Cooling, Current Bank) 92 (5C hex)
Yes Yes Derivative Time (Cooling, Current Bank) 93 (5D hex)
Allo-
cated
in IN
Area
Allo-
cated
in OUT
Area
Parameter name Allocation number
for expansion remote
I/O
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Bit
(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (1)