Omron EJ1 - 07-2008, Operation Manual

Page: 108 / 198

89
Operations from the Edit Device Parameters Window Section 5-2
5-2-6 Setting Last Maintenance Date
With DeviceNet Communications Units, the last date on which maintenance
was last performed can be written to the Unit. This means that the timing for
future maintenance can be judged more easily. The recorded date can be
checked from the Maintenance Mode Window.
Note The present value and monitor value for the conduction time are held even
when the power is turned OFF.
Setting Method
1,2,3... Open the Edit Device Parameters Window for the DeviceNet Communications
Unit, click the
General Tab, and select the applicable date from the calendar
in the pull-down menu in the Last Maintenance Date field.