Omron EJ1 - 07-2008, Operation Manual

Page: 67 / 198

48
Allocating I/O from the Configurator Section 4-3
Leave the field blank for unit numbers that are not allocated to Temperature
Controller.
Note Click the Set Button to display the Edit Unit Parameters Window
and then edit the parameters of the corresponding Temperature
Controller (refer to page 93). Click the Operation Button to display
the Operation Commands for Units Window, and control the corre-
sponding Temperature Controller (refer to page 91).
Click the Copy Button to copy parameters between Temperature
Controllers simply by specifying the copy source and destination.
(refer to page 89).
4. Create Allocation Data for the OUT Area
Create the allocation data for the OUT Area in the I/O Allocations (OUT)
Tab Page. Select the data to be allocated from the list in the
Parameters
field (top half of window), and drag the corresponding word to one of the
Allocation Areas (bottom half of window).
Alternatively, select the parameter to be allocated and click the
Allocate
Button to display the I/O Allocations Dialog Box. Specify the allocation des-
tination and click the
OK Button.
Note a) The number of words from the first word is shown as + @ , where
the box indicates the number.